H2S/Sulphide- and O2- micro-sensors for submersible probe systems

 

mocrosens                        Features:

- In situ measurements - Very Fast Profiling
- response times down to some hundred ms
- high signal and local resolution
- no chemical consumption
- very low detection limits
- no streaming
- titanium housing
- integrated electronic devices
- operational pressure range: 100 dbar
- dimensions: diameter: 22 mm, length: 248 mm
- signal output: 0 to 5 VDC, power supply 12 VDC
- concentration ranges:

  

O2 sensor      


 0 ....     200% saturation           

H2S sensor

Type   I:     0,01 ...     3 mg/l
Type  II:     0,05 ...     5 mg/l
Type III:     0,5  ...    50 mg/l

 

Fast profiling measurements performed with an AMT-O2-micro-sensor installed in a BIO-FISH system

 

2009-05-12_125028

 

 



















pdf_button   Download Datasheet AMT H2S Sensor

pdf_button   Download Datasheet AMT O2 Sensor

 
Redox and pH sensors for submersible probe system

pH shallow water sensor for depths up to 1200m

               ph_shallow_water_sensor

Features:


- measuring range: variable between 0...14 pH
- accuracy: 0,05 pH
- resolution: approx. 0,003 pH
- pressure range: up to 1200 dbar
- dimensions: length over all: 240 mm
  diameters: max. 37 mm (with protection cage)
  max. 30 mm (without protection cage)
- connector: BH 4 M SUBCONN, titanium, others
  on request
- output: 0 to 5 V DC
- input voltage: 9 to 30 V DC
- current uptake: approx. 13 mA
- response time: 1 second (63% of readin


pdf_button   Download Datasheet AMT pH Shallow Water Sensor

 

pH deep sea sensor for depths up to 6000m

ph_deep_sea_sensor                    

Features:


- measuring range: variable between 0...14 pH,
  standard: 2...11 pH
- accuracy/resolution: 0,05 pH/0,01 pH
- pressure range: up to 6,000 dbar
- required power supply: 9.5...18 V DC as standard
  (others on request)
- signal output: 0 ... + 5 V DC (others on request)
- dimensions: diameter: 29 mm, length: 250 mm
  over all

pdf_button   Download Datasheet AMT pH Deep Sea Sensor

 

ORP shallow water sensor for depths up to 1200m

ORP_shallow_water_sensor                

Features:


- measuring range: +/- 2,000 mV
- accuracy: +/- 1 mV
- resolution: approx. 1 mV
- pressure range: up to 1,200 dbar
- dimensions: length over all: 240 mm
  diameters: max. 37 mm (with protection cage)
- connector: BH 4 M SUBCONN, titanium, others
  on request
- output: 0 to 5 V DC (others on request)
- input voltage: 9 to 30 V DC (not included)
- response time: 1 second (63% of reading)

pdf_button   Download Datasheet AMT ORP Shallow Water Sensor

 

ORP deep sea sensor for depths up to 6000m

ORP_deep_sea_sensor                    

Features:


- measuring range: +-2 Volt
- accuracy/resolution: 2 mV/0,1 mV
- pressure range: up to 6,000 dbar
- required power supply: 9.5 ... 18 V DC, others on
  request
- signal output: 0 ... + 5 V DC (others on request)
- dimensions: diameter: 29 mm, total length: 250
  mm over all

pdf_button   Download Datasheet AMT ORP Deep Sea Sensor.pdf

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of this site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

  I accept cookies from this site.
EU Cookie Directive plugin by www.channeldigital.co.uk